I have AC coupled a 48/15000 Quattro to a fronius 8.2 primo and is working fine on battery charging and frequency shifting. But when the PV is working no AC loads show on the CCGX just wondering if there is a setting i have missed?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have AC coupled a 48/15000 Quattro to a fronius 8.2 primo and is working fine on battery charging and frequency shifting. But when the PV is working no AC loads show on the CCGX just wondering if there is a setting i have missed?
MultiPlus Product page / Quattro Product page
MultiPlus 230V Manual / Quattro 230V Manual
MultiPlus 230V Datasheet / Quattro 230V Datasheet
VE.Bus Error codes / VE.Bus configuration guide
AC-coupled PV with Fronius PV Inverters live docs
Fronius Webinar: Fronius & Victron Energy: Easy system set-up
Fronius Advanced Webinar: AC Coupling with Fronius & Victron (AFR)
Fronius Webinar: Smart rural electrification with Fronius and Victron Energy
3 People are following this question.