I am installing victron LIpho batteries and need to know what the setting should be on my multiplus. There are 4 options listed but none include Lithium.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I am installing victron LIpho batteries and need to know what the setting should be on my multiplus. There are 4 options listed but none include Lithium.
What batteries do you have exactly?
Maybe you also have to install a BMS assistant.
With so many battery types out there Victron can't cover them all.
Usually just set the voltages to suit the batteries you have. So look up the spec for you batteries and use the values they recommend. unless you have a compatible battery then all the instructions are available on the site.
Check the lithium batteries box.
Set your float and absorption and charge current.
And absorption time and interval.
MultiPlus Product page / Quattro Product page
MultiPlus 230V Manual / Quattro 230V Manual
MultiPlus 230V Datasheet / Quattro 230V Datasheet
VE.Bus Error codes / VE.Bus configuration guide
Additional resources still need to be added for this topic
Did You Know - How to create a battery profile for non-Victron batteries?
23 People are following this question.