This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi Guys, Ive just installed the 712 Bluetooth monitor, Ive set the correct battery set up and also watched the set up video for the sync settings, I'm using AGM batteries and have therefore set a discharge limit of 50% - The question I have is that say the monitor shows 75% battery %, is that 75% of the total capacity (In My case 400AH) or 75% of the set discharge limit (IE 75% of the 50% limit (or 200AH in my case) - Thanks....
I have a SmartShunt so I assume the settings are similar with your BMV.
The State of Charge (SOC) % is the remaing percentage from the total battery capacity you set (400 Ah in your case), as Harold alredy said.
The "Time remaining" estimate is the estimate time left (at current load) to the "discharge floor" you set.
Be careful: this discharge floor set here (in the SmartShunt/BMV settings) is only used to estimate this "time to go / time remaining". It is not a discharge limit for the inverter. You have to limit the inverter to not discharge the battery below a certain voltage (or SOC) using settings elsewhere (in the Inverter and in the GX device if you have one and if using ESS for instance).
