question

bonie-wanda avatar image
bonie-wanda asked

Wind turbine and controller: what is recommended for Multiplus-II/Venus/BlueSolar/Pylontech installation?

I have a small 48v Multiplu—II/BlueSolar/Pylontech/Venus system installation. It works perfectly.

I want to consider a charge aid in the form of a small wind turbine and wind charge controller for those dark rainy windy days. Nothing to big.

Hydro and Wind Power
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bonie-wanda avatar image bonie-wanda commented ·

multiplus-II 48v 3000va;

pylontech 48v 2x 3.5kwh;

bluesolar 150/45 and 150/35

pv panels 8x250w and 4x375w

0 Likes 0 ·
2 Answers
Paul B avatar image
Paul B answered ·

there are not a lot of wind generator controllers out there and most use some form of resistor as a load dump if they need to reduce the battery charge. so I dont think there will be a recommendation, except to go with whats recommended with the wind gen that you purchase.


the AIRX has its own inbuilt regulator and others have different setups

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

smueff1970 avatar image
smueff1970 answered ·

Hi,

have you found a solution ?

Thanks

Thomas

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic