I have installed a Balancer on my 4 batteries, 2 x 2 12V batteries to 24V. The balancer is connetced as it should as I see it. However there is no light on the balancer, and the difference is increasing.
The difference is increasing. The datasheet says;
The Solution: battery balancing The Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries. When the charge voltage of a 24V battery system increases to more than 27,3V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery Balancer will draw a current of up to 0,7A from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge.
Does the sentecne in bold means "start working", or is it so that the balancer will not have any light, even standby light, before it starts balancing?
