question

advaith-g-n avatar image
advaith-g-n asked

Communicating to full system of Venus GX

I have tried Modbus TCP/IP but it seems very diffiult for me to figure out.


I am now trying a new method that use Ethernet to RS232/485 converter for getting data from Venus GX to TI Launch pad.


I don't know whether this will success. Kindly GUIDE ME.


Regards: Advaith

Venus GX - VGX
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
markus avatar image
markus answered ·

Hi Advaith,

maybe you could elaborate, what you would like to archieve as an end result and why. There are a lot of ways possible, to monitor or control Victron equipment.

A "Ethernet to RS232/485 converter " might not be the best solution to begin with.

Best Regards,

Markus

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.