question

martinh avatar image
martinh asked

Feed in power displayed as AC Load

Hi

I have a multiplus 2 5kVA , Cerbo, Carlo Cavassi, MPPT 150/70 and Gel batteries 170ah

Batteries are set to "keep batteries charged".

When I set up the system to feed excess power to the grid, the power that is fed back is added to AC loads and the grid displays 3W. The utility meter shows that power is fed back to the utility but the grid indication stays positive 3W.

Any ideas what I can look for?

@mvader (Victron Energy)

@Daniël Boekel (Victron Energy Staff) - user overview - Victron Community

@Matthias Lange

@Guy Stewart

@Matthijs @Johannes Boonstra @Fronius Danmark

ESS
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·

@MartinH

Not sure if this applies to the Gavazzi meters but did you assign a position for it's installation on the GX?

0 Likes 0 ·
martinh avatar image martinh Alexandra ♦ commented ·

Yes it is set up as external grid meter.

0 Likes 0 ·
0 Answers

Related Resources

Additional resources still need to be added for this topic