question

glenn-1 avatar image
glenn-1 asked

VRM not displaying consumption

I have installed a Cerbo GX connected to a BMV-712 on my boat monitoring a bank of four batteries. I also have an MPPT 150/60 solar charger connected to the Cerbo GX. Everything has been working perfectly monitoring charging and load until yesterday when I had to power off the Cerbo GX. After powering it back on, VRM is no longer displaying consumption data (see below).

Any suggestions would be appreciated.


screen-shot-2020-12-08-at-233559.png

VRM
screen-shot-2020-12-08-at-233559.png (135.2 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

reboot the unit and make sure you are on the latest FW.

consumption also only shows if HAS DC systems is turned on so if it still does not show turn this off then reboot and then turn if back on

Also try re detect (its under the inverter and advanced selection)

these are only guess's for you to try

hope this helps out

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.