I just bought 2 E-bikes with a Bosch Performance motor 65 Nm, a 500Ah Bosch battery and a 4A Bosch charger.
I want to charge the batteries with the Bosch charger 36V-4A / 230V-1,5A inside the camper while driving.
For this I want to connect the Bosch chargers to the 220 V Schuko output of a Victron Phoenix 12V / 500Watt pure sine wave inverter.
Which gets its energy from the Victron 130 Ah Gel Deep Cycle battery on-board battery. This battery is powered by the alternator of the Fiat engine from 2012 and by 2 solar panels of 120 Watt each via a Victron Bluesolar MPPT 75 V / 15 A charge controller.
My question: is this a safe way of charging the expensive Li-Ion Bike batteries?
And are there in this charging configuration things ready for improvement ? Or does anyone foresee other problems?
PS. Another question is which of these 2 configurations is better or safer?
Victron Deep Cycle Gel accu 12V/130AH
Victron Bluesolar MPPT 75V/15A
Victron Phoenix omvormer 12V/500Watt
Victron Deep Cycle Gel accu 12V/165AH
Victron Bluesolar MPPT 75V/15A
Victron Phoenix omvormer 12V/800Watt