question

Kaloyan Dimov avatar image
Kaloyan Dimov asked

SoC jumps to 28499% SoC

Hi There,


We have an issue with an SoC, which jumps to 28499% and goes back to normal SoC from time to time since the 21st of November.


The setup is:


- Quattro 48/15000/200-2x100 fw 475 three-phase setup

- 3 x SmartSolar Charger MPPTs 250/100 rev.2 fw 1.50

- ABB grid-tie inverter

- Fronius Eco 27.0-3-5

- Cerbo GX fw. 2,57

- 24 x SS202 Solar MD batteries with Logger V2 v.2.03

historical-data-vrm.png


a firmware update on the logger V2 from Solar MD was done on the 26th of November, but the issue started on the 21st of November. We from Solar MD couldn't find an issue on our side.


We will replace the logger to the client, but still interesting to understand if somebody had this issue before.


Regards


Kaloyan





CCGX Color ControlSOC
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @Kaloyan Dimov

Yes I've seen this when BMS sends incorrect values. You could make a battery go to 110% ;)

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

CCGX Product Manual

CCGX Product page