question

Javier Moran avatar image
Javier Moran asked

ESS Mode using surplus solar energy when batteries are charged

Dear Community, good night


I have and EasySolar (CGX + Multi + MPPT Charger) the Multi has AC grid connection.

Wanted to know if the follwing behavioir can be implemented:


1.- System is must keep all batteries charged. Batteries are used as back up in case of an AC outage.

2.- If batteries are fully charged all solar power must be used to power the AC Loads


As I understand the mode that better fits is "Keep batteries charged". Is this correct?


Thanks for your support.

Best regards,

ESSMPPT SmartSolar
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Rob Duthie avatar image
Rob Duthie answered ·

Hi

Yes that is correct.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Javier Moran avatar image Javier Moran commented ·

Thanks for your reply Rob.

Best regards,

0 Likes 0 ·