question

beny avatar image
beny asked

Venus OS Raspberry - modbus connection

Hi, I'm testing Venus OS on Raspberry with SolarEdge inverter. The inverter can be seen in the GX visualization, the modbus ID received 20. I'm trying to scan addresses, but I'm still getting errors. Gateway Path Unavailable


victron-erors.jpg

Raspberry PiModbus TCPerror
victron-erors.jpg (33.2 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
styrx avatar image
styrx answered ·

I have the same problem with iobroker to connect to my Cerbo GX.

Poll error code: {"errorCode":132,"exceptionCode":10,"message":"GATEWAY PATH UNAVAILABLE"}

Did you find a solution?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mikhail-petukhov avatar image
mikhail-petukhov answered ·

Looks like you have to set the SolarEdge Device ID 126 as mentioned there https://community.victronenergy.com/questions/12227/victron-venus-gx-solaredge-se10k-3-phase-inverter.html

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

Raspberry Pi running Victron’s Venus firmware - Blog Post

Venus OS Large image: Signal K and Node-RED - Install

raspberrypi install venus image


Modbus TCP Basics

Additional resources still need to be added for this topic