Hi,
I just noticed a lot of noise from the fan when it starts rotating in my multiplus.
I need to get a spare one, does anyone have the specification please?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
I just noticed a lot of noise from the fan when it starts rotating in my multiplus.
I need to get a spare one, does anyone have the specification please?
Just replaced the fan on my "old" MultiPlus 24/3000/70-50 - Product ID 1910 (not a "Quattro", mind you).
Found the original one to be a Sunon EEC0382B2-000U-A99 (which first failed me ~3 years ago because the solder on one of the wires became loose due to some sort of oxidation, now started to do a nagging high-pitched sound, presumably due to vibrations transmitted to the metal air vent protection grid).
Replaced it with a Multicomp MC002108
Spec.s are similar enough.
Profited the chance to add a fan (anti-)vibration sleeve and replace the grid with a plastic one [which, turns out, may potentially dampen the vibrations better but forces the air to pass trough square angles - unlike the original metal grid, which was round - making a bit of a vacuum cleaner tube like (sucking) sound].
You need to remove the front cover not just the lower access cover to access the fan. It's up inside by the transformer.
25 People are following this question.