Hello, how does the MultiPlus switch off in normal operation without emergency (intervention by BMS) when the battery is empty?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello, how does the MultiPlus switch off in normal operation without emergency (intervention by BMS) when the battery is empty?
It can be sent to turn of at a particular SOC or voltage using its internal battery monitor. (Not accurate if you have DC loads other than a multi)
Or you can set up an assistant to use the relay on a BMV-7xx and aux input to signal the multi to shutdown at any number of criteria. but usually SOC is used.
23 People are following this question.