Cerbo GX dead after update to 2.60

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

liopleuredon asked Nov 28, '20

Hello,

I am reading here already for a long time but now my first question.

I have a new Cerbo GX since yesterday,everything was ok but after the update to 2.60 nothing works.

I have no access any more,the wifi led is orange,sometimes blinking or off or steady ?

The bluetooth led never lights any more.

I tried the reset button,and try to connect by cable to my router nothing helps.

Any ideas ?

Regards Eric

cerbo gx firmware update

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE answered · Nov 28, 2020 at 02:17 PM

I guess you have a very rare known bug.
Unless you are a Linux expert the only thing you can do is to contact you dealer for an exchange.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2020-11-28T16:41:34Z

liopleuredon answered · Nov 28, 2020 at 04:41 PM

@Matthias Lange - DE Thank you,(danke) i sended an email to my dealer with a link to this thread,lets see what happens.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.