question

Nikolas_MX avatar image
Nikolas_MX asked

Switch as a Group (3ph. system, input 1)

Hi all,

it seems to me the feature "Switch as Group", in the VE.Bus Configurator, is a bit under-documented .

So, please verify, in a three phase system with Quattros in all phases (at input 1), when "Switch as Group" is not checked, does it affect all the Quattros ? ..... meaning that any of the three, and any number of them, can operate as inverter or charger independently?
In that case, one or two units, could operate with the ""Power Assist" feature, while the remaining one (s) can operate as charger.

Thanks.

MultiPlus Quattro Inverter ChargerGenerator3 phaseVE.Bus
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers