This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Does the Orion TR Smart Charger have voltage present on the input terminal with no source connected? I ask this because the set-up I have already includes a voltage sensing combiner relay closest to the Start battery. The combiner won't close-in to admit input power to the charger unless there is a voltage present.
Hi,
I tried this and it does not work.
I replaced my cyrix ct with a battery disconnect switch.
The cyrix needs to see voltage both sides before it will combine.
The orion needs voltage on the inout before it will startup.
Alex
