This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
I refer to a comment from Daniël Boekel in an earlier post:
"generally: mode3 = external control,
mode2 = optimized, and you set the grid-setpoint and charge / discharge enable."
My questions is:
For Mode 2, can I chose between "optimized (with Battery Life)" and "optimized (without Battery life)"?
Thx a lot,
Peter
Hi @peter_vddriessche@hotmail.com
Yes you can use both, it will adhere to the SOC limit. the only thing you have to send is the grid setpoint (you can set more registers but this can be enough)
