Hello, I’ve bought a 100Ah 12V lifepo4 battery with a JBD Bluetooth BMS. I used the battery for the first time and I discharged it down to 30Ah. Then, I used a Victron Energy IP65 smart battery 10A charger with factory Lifepo4 settings. the bms shows about 9.91 A of current being charged into the battery during the charging but, after only 4.10 hours the charging cycle is completed. The Victron connect app show that 44Ah were charged and the BMS indicated that the battery is 100% charged (100Ah) which sounds strange to me... if the battery has a capacity of 100Ah and with 30Ah still in it it should have charged 70Ah in about 7hrs. So, either the battery is undersized, or the charger is not properly calibrated for the battery. Is there anybody else having this kind of problems using Blue smart charger with a lifepo4 battery ??? Thanks