This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi all,
I am looking for a source for housing parts.
I own an Easy Solar 48/3000/35 MPPT 150/35 (2x), where both side housing parts, protecting the two MPPTs, are badly damaged.
I already asked a local victron distributor, who told me that victron is not providing spare Parts for housings.
That was an unpleasant surprise, and I was not expecting that kind of answer.
Hopefully there is still a way to get those parts.
Any hint is welcome.
Best regards
Andreas
I don't know this with any certainty, but this product might be an empty housing which you could utilize parts from?
Part #: DPMP482307010
Description: Dummy EasySolar-II 48/3000/35-32 MPPT 250/70 GX C
I like the initiative @Wildebus, but there are SIGNIFICANT differences between the physical case of EasySolar and EasySolar-II.
I do not think this substitution would be possible.
@Andreas Siebenmorgen, Sorry to say, I think your distributor is correct. It would be a significant operation to move the internals over, even if you could find a spare case, with no guarantee of success.
You could give it one last shot by sending a support request form and asking if the Victron repairs dept (who has access to spare parts) can confirm that this would not be possible - to http://professional.victronenergy.com/support/
Hi, the part number of my device is PMP483027010.
I added a description with a picture to my question to clarify the situation.
To clarify what is damaged I add this picture.
The red marked parts are damaged.
It is quiete simple to remove the side cases, just 8 screws, and that’s it.
No internal electronics to swap.
There are just the two MPPT BlueSolar 150/35 hidden behind.
