This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi all, really hoping someone can help me with this.
i have 4 pylontech 2.4kwh batteries installed and only 3 are showing (75a). To my understanding as each battery is 25a and there’s 4 So I should be seeing 100a in The parameters Menu. I’m pretty sure they’re wired up correctly.
Any help would be greatly appreciated
Iam not sure, because i dont have these Batterys. But the Wiring for the Data is always - Top in, bottom out. But on the last Battery you pluged "in" to the bottom. Maybe that belongs in the upper Plug/Socket?
