This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi The Victron Phoenix 12v-50a Charger has 2 x main battery charging output circuits I have 2 x 12v 230Ah batteries connected in parallel my question is, do I use both circuits and connect one to each battery or do I just use one circuit which would connect to both as they are wired in parallel ?
Thank you in advance
Richard
Just one, the Phoenix outputs are independent circuits, but if you use on two separate battery banks you will use both outputs, limited overall output 50A on both circuits
