This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, All
I understand that max system we can get from Victron Quattro is 180 kVa . However, I donot know how the DC bus can be configured. For example , I am designing a 3 phase system using 9 of quattro 15 kVa for a total 135 kVa with 48 battery modules, 150 kWh battery. The DC bus current is around 135000/48= 2800A. Can I still use DC power in and distributor? They are rated as 1000A.
Thanks
It’s possible, as the batteries and Quattros will be distributed across the BUS with multiple take offs, but really not advised.
Usually a custom bus bar arrangement is required.
Generally speaking, systems that approach the maximum possible configurations are done in closer consultation with the regional sales managers, as there are many complexities that require additional support, experience & training.
It is not recommended to start on a system as large as this when just beginning with Victron.
If you have a customer or application for such a system (and this is not just a curiosity), please contact sales@victronenergy.com for further help.
