question

zzz avatar image
zzz asked

Phoenix Multicontrol cable pinout

I own an elder Phoenix Multicontrol and a MultiPlus 12/3000/120 which were once connected but the connection cable has gone.

A normal RJ45 works with MK3 but doesn't with the Phoenix Multicontrol.

There are a lot of RJ45, RJ48 variants out there :(

Can anybody specify the exact cable type or provide a pinout for the Phoenix Multicontrol.

multiplus ve.bus
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
wkirby avatar image
wkirby answered ·

It is a standard RJ45 computer network cable. 568A or 568B wiring the same at both ends (not crossover).

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

labtopia avatar image labtopia commented ·
FINALLY!!! thank you! 20+ questions on this with people answering "Im not sure" or "don't know" "I dont have one". Why people comment on things when they have no valid input is beyond me. This should be in a wiki or sticky...
0 Likes 0 ·
zzz avatar image
zzz answered ·

Thank you :)

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic