question

Matthias Lange - DE avatar image
Matthias Lange - DE asked

RJ45 Wires used by VE.Bus? pin out?

Hallo,
are all 8 wires of the RJ45 used for VE.Bus?
If not what is the pin out?

A costumer asked me that today because he thinks he have a damaged wire in his installation.
The wire is under ground and can't be changed, so he asked me if he can try figure out what wires are still good and use this wires for the VE.Bus.

wiringVE.Bus
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

It looks like 6 wires are used.


1602788734429.png (27.6 KiB)
3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

Thanks, where did you find this? I also searched a while but can't find anything.

0 Likes 0 ·
wkirby avatar image wkirby ♦♦ Matthias Lange - DE ♦ commented ·

https://github.com/victronenergy/venusgx-hardware/blob/master/VE_BBB_Cape_v0.80_released.pdf

0 Likes 0 ·
Matthias Lange - DE avatar image Matthias Lange - DE ♦ wkirby ♦♦ commented ·

Great! Thank you!

0 Likes 0 ·

Related Resources

What is VE.Bus?

Additional resources still need to be added for this topic