question

wings45 avatar image
wings45 asked

Auto switching 3600 Isolation Transformer question

Is it possible to set a Victron 3600 auto-switching isolation transformer to deliver 230v regardless of input (115v or 230v)? Or will it simply "autoswitch" the output between 115 and 230 depending on the proximate input voltage? My output is connected to a Centaur charger, a water heater and the AC panel selector switch- Shore/Off/Inverter.

Isolation Tranformer
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Rod avatar image Rod commented ·
Automatic voltage switching :

1. Senses the imput? Or the output voltage?

2. Takes action switchin the input or output taps?

3. The omponent that is sending switching requires what control-operating voltage ?

4. Is there NO output on the intermedia input voltages?


0 Likes 0 ·
1 Answer
jwfrary avatar image
jwfrary answered ·

Hi, Yes, I was under the impression this was the case,

You set the jumpers above the output connector to the desired output voltage.

I haven't used one like that, the manual could use some clarification I guess.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic