question

jon-lowbank avatar image
jon-lowbank asked

Stop MPPT Charging via relay when connect to GX device.

I have a Cerbo GX a MultiPlus and a SmartSolar MPPT 250/100.
I have a custom Lithium Battery with allow to Charger and Allow to Discharge Dry contracts.

If I have the MTTP connected to the GX device Via a VE.Direct cable I can not use the VE.Direct non-inverting remote on-off cable.

How can I stop the MTTP Changing by a relay and also have the MPPT connected to a Cerbo GX ?


MPPT Controllers
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
klim8skeptic avatar image
klim8skeptic answered ·

A brief glance at the Installation Manual shows you can use the remote port to enable/disable charge. Page 7..



mppt-250-100-mc4-front.jpg (576.0 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jon-lowbank avatar image jon-lowbank commented ·

My bad haven't had this terminal on other models I've used I assume it on the VE.can model as well.

0 Likes 0 ·