Hi
I'm running Venus firmware V2.6 and today I plugged in a USB GNSS Receiver (Navilock NL-602U u-blox 6).
The OS has recognized the GPS but still after 2 hours still no GPS fix.
So does anyone has suggestion on how to fix.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi
I'm running Venus firmware V2.6 and today I plugged in a USB GNSS Receiver (Navilock NL-602U u-blox 6).
The OS has recognized the GPS but still after 2 hours still no GPS fix.
So does anyone has suggestion on how to fix.
Hi @philippe, maybe try to move the antenna so if can have a clear view of the sky? Or try it on a laptop. There are some opensource windows navigation programs, like "opencpn". You can then test the GNSS receiver. If it works on your laptop, then the question is if your GNSS is compatible with Victron hardware.
Regards, Rob
Hi Rob,
No laptop with Windows running. But a the first glance, the led is blinking when I plugged it in the car USB on the way back and also on my iMac, what is a change in behaviour. When it was on the Venus (fix led) Need to dig it further out, but I suspect that the Venus OS has a problem with....
Thanks
Philippe
Hi Rob
Got it talking with the opencpn via the serial datatport /dev/cu.usbmodem14401 (u-blox 6 -GPS receiver) @ 4800 baud rate.
So the device works correctly. Just a bit of the log....
<GREEN>20:34:21 (Serial:/dev/cu.usbmodem14401) $GPGSV,3,2,12,15,43,293,09,18,15,298,18,20,09,324,,23,06,326,*70<0x0D><0x0A><GREEN>20:34:21 (Serial:/dev/cu.usbmodem14401) $GPGSV,3,3,12,24,07,248,,27,00,000,,28,52,120,27,30,45,066,27*7C<0x0D><0x0A><GREEN>20:34:21 (Serial:/dev/cu.usbmodem14401) $GPGLL,5049.9046,N,00423.0913,E,183421.000,A,A*59<0x0D><0x0A><GREEN>20:34:22 (Serial:/dev/cu.usbmodem14401) $GPRMC,183422.000,A,5049.9045,N,00423.0913,E,0.46,279.25,290920,,,A*67<0x0D><0x0A><GREEN>20:34:22 (Serial:/dev/cu.usbmodem14401) $GPVTG,279.25,T,,M,0.46,N,0.8,K,A*0C<0x0D><0x0A>
<GREEN>20:34:22 (Serial:/dev/cu.usbmodem14401) $GPGGA,183422.000,5049.9045,N,00423.0913,E,1,05,2.2,100.1,M,46.2,M,,0000*59<0x0D><0x0A>
Looking for advice why Venus does not deal with it as expected.
Best
Philippe
ps: readout from the configuration (iMac):
u-blox 6 - GPS Receiver:
Product ID:0x01a6
Vendor ID:0x1546
Version:7.03
Speed:Up to 12 Mb/s
Manufacturer:u-blox AG - www.u-blox.com
Location ID:0x14400000 / 21
Current Available (mA):500
Current Required (mA):100
Extra Operating Current (mA):0
Buongiorno, anche io ho problemi con il GPS collegato al CERBO. Fino a poco tempo fa funzionava correttamente ma sulle ultime versioni ho lo stesso problema di Filippo.
27 People are following this question.