Can somebody check the tcp registers, I’m using VenusGX units with a energy meter connected
all was working perfectly until the kWh reached 655.35 which is the max value for register A2B (2603) which I know Is the maximum for one word unsigned decimal. So I’ve switched the register to A3E (2622) and changed to double word but the register does not give the correct value,
the Venus is now showing 667 kWh but the register returns 710410.25
im running the latest firmware 2.60
any help would be appreciated
ive tried various programs to verify the plc results and all comeback with the same value
regards
shane