question

dolflombard avatar image
dolflombard asked

BlueSolar Charger MPPT 150/70 (VE.Can) not gridfeeding anymore.

Since 13 Sept 2020 my BlueSolar Charger MPPT 150/70 (VE.Can) stopped gridfeeding. It only use the solar panels until the battery is full. The PV inverter still gridfeeds.

I suspect my Colour Control GX's firmware was updated. I see the it currently has v 2.6 and it was released on 2020-09-06. I went through all the settings that could affect it and it all seems ok.

The mppt is also on the newest frimware.

If there is no fix can I roll back to previous firmware and where can I get it?

Attached my layout. And the graphs showing the date it stopped. also relevant settings.



MPPT ControllersESS
mppt.jpg (63.7 KiB)
graph.jpg (63.0 KiB)
feedin.jpg (43.7 KiB)
dvcc.jpg (51.9 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
dolflombard avatar image
dolflombard answered ·

It seems my Mppt controller is not supported with DVCC?


1600958218718.png (35.6 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual

Additional resources still need to be added for this topic