This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
i would like to connect my alternator and wind generator to the Cerbo GX so I can monitor each of their individual contubutions to charging the batteries. I understood that the Victron Smartshunt would do that but now I understand that it won't.
Any assistance would be very much appreciated.
When a Smartshunt is connected to the CerboGX is will be mesuring battery current as intended.
Additional Smartshunts can be connected and will be visible in the Device Listbut only one of them can be selected as the battery shunt. It is not possible to configure additional Smartshunts to measure energy sources.
