question

dirkgt avatar image
dirkgt asked

BMV712 jumps from 80 to 100%

My BMV 712 shows e.g. 80%, this is realitic after using coffee machine and hair dryer in the morning. After sun raise, solar starts charing, early in the morning certainly just with a few watts.

If I close the app an reopen it a few minutes later, the BMV shows 100% although solar is charging.
This misbehaviour happened now a few times.

Jumping from 80 to 100% is quite bad, I need to know my remaining capacity more exactly....

Has anyone an idea, what wents wrong?

Thanks and best regards

Dirk

BMV Battery Monitor
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

Have you followed any of the steps in the BMV manual that guides you about editing the necessary settings to make sure the sync is accurate?

https://www.victronenergy.com/battery-monitors/bmv-712-smart#manuals

There are numerous posts here on the subject as well such as:

https://community.victronenergy.com/questions/61030/setup-of-bmv-with-victron-agm-batteries-and-solar.html?childToView=61068#answer-61068


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.