This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
My multiplus is connected to 3x200ah victron lifep04 batteries and only charges at 64.9 amps max. I have 2kw of solar running through victron MPPT Charge controllers and multiplied comes up with a total of the solar input plus the 69.4a from. The multiplus. My multi control is set to 16a.
Why am I only getting the 64.9a from the multiplus. I'd prefer 120a
Check with CONFIGURE how the the charge current is set for your unit.
Your 600 Ah should take more than that and it will work when configured correctly.
I had this issus until I realised that I had limited the charge current of my parallel multies.
Hope this was the reason.|
Regards
Gmd
