I want to use my MPPT 100/50 1) with a bicycle powered alternator (0 to 75V and 36A, up to 1000W but 100W normal power) at the input and 2) different electrical consumers or battery charging at the output. Actually I need a DC-DC converter with very wide input voltage range.
1) This seems to work fine (with battery at the output) but the MPPT should be switched off to get this working like a normal DC-DC-converter. Otherwise, the MPPT will never find the right point because the input voltage changes to fast. Can I switch MPPT off somehow via VE.direct settings or custom firmware?
2) I didn't try that yet because I fear to destroy the device. Is it possible to directly connect different consumers (e.g. DC-AC inverter, 12V Car Mobile Charger, Car Hifi)?
