I have installed an Multiplus 3000/100/12 and only! connected 12v. I measure 230v between line and ground. Is this normal?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have installed an Multiplus 3000/100/12 and only! connected 12v. I measure 230v between line and ground. Is this normal?
This is how electrics works... line powers neutral absorbs... if the function grounded neutral is active Use a rcd After to be Sure to be safe...
in the inside of the casing of the Victron a little picture shows the connections
28 People are following this question.