This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Are there and Assistants where one can improve self consumption with a Multiplus where the Solar Grid inverter is on the input to the Multiplus and where there is no requirement to limit grid feed in power. Obviously an Energy meter and a Venus device is required. Seems to restrictive that it appears that this is not possible presently
Hi
Use the ESS assistance to do this, The Venus CCGX device or you can use a raspi as a much cheaper alternative as it acts a the controller for the ESS system, which is required, as the mulitplus by itself won't work as you have intended only a basic inverter or UPS mode functions.
I have installed a couple Muliplus2 with a raspi as the main controller for ESS, and they work perfectly, no power bills and in credit with the power retailer as i self consume and export as required etc.
Regards
Rob D
NZ
I'm confused as to why you would need an assistant? The Solar on the input would be used before the grid, not sure what else an assistant could do if you have no battery or special load to soak the solar.
Hello Merle Peter, you do not need the Energy meter. As the Grid connected Solar system is on the input of your multiPlus it will not work if the grid fails. So just let the Grid Solar system harvest as much as possible. For the Victron system to generator nice diagrams you can include the energy meter.
The ESS assistant will only do it's best do deal with the stuff on the AC output and DC part of the MulitPlus.
Hope this helps.
Best regards, Rob
