I'm familiar with programming the Multiplus using VEConfigure and loading assistants through that program. Now that I'm using VictronConnect to program the Multiplus, how do I load the VE.Bus BMS Support Assistant?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I'm familiar with programming the Multiplus using VEConfigure and loading assistants through that program. Now that I'm using VictronConnect to program the Multiplus, how do I load the VE.Bus BMS Support Assistant?
You will need a MK3 cable and make such settings via VEConfigure as per the manual:
https://docs.victronenergy.com/victronconnect-vebus.html#victronconnect-vs-veconfigure-veflash
29 People are following this question.