This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi . I have a system with a 250/80 MPPT, and BMV which is set as the active battery monitor on the Color Control. I was expecting the BMV to reset to 100% when MPPT reaches float, but it does not and hovers around 98%. How do i get the BMV to reset to 100%
DVCC is not turned on, i know there are 2 Absorb charge options in the MPPT.
The BMV manual
https://www.victronenergy.com/upload/documents/Manual-BMV-700-700H-702-712-EN-NL-FR-DE-ES-SE.pdf
Has all the info you need about how it works and the settings required to get it to sync the SOC.
