question

michelg avatar image
michelg asked

Cerbo CX stuck at 60% when trying to connect via bluetooth

Hi everybody !

After upgrading from 2.58 to 2.60 the Cerbo GX firmware, I have an issue trying to connect with Bluetooth. It connects up to 60% and remains stuck at it. The other Victron hardware (mppt, battery protect, etc) have no issues.

I have also been searching for the "eject" MicroSD card, and not found it.

I also did not find the setting in order to perform an equalization from the Cerbo GX on the mppt SmartSolar 150/100.

Being 100% off-grid, is there an option to disable the "red" square providing the information for the Grid / Generator input ?

Thanks for your comments and help.

Michel


cerbo gxfirmware update
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Thiemo van Engelen (Victron Energy staff) avatar image
Thiemo van Engelen (Victron Energy staff) answered ·

Hi @MichelG

Regarding the Bluetooth connection, you could try to remove the pairing on your phone/tablet and then try again to connect. It should ask for the pin code again.

Regards,

Thiemo van Engelen

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

michelg avatar image michelg commented ·

Thanks Thiemo ! Issue fixed. Waiting for the rest of my question. Have a sunny day !

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic

Cerbo GX product page

GX family product range

Cerbo GX & GX Touch datasheet

Cerbo GX Manual

Venus root access document