question

stigandresen avatar image
stigandresen asked

Connect GX touch 50 to Easysolar 2 GX?

Hi


Can i use a GX Touch 50 on my Easysolar 2 GX to display information?


REgards, Stig

gx device
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

No, the GX touch 50 is only for the cerbo GX.
As long as the EaysSolar II GX is connectet to your LAN you can access the remote console from every device by entering the IP or " venus.local " into a browser.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

stigandresen avatar image
stigandresen answered ·

Thanks Matthias!

I guess i just buy and use the Touchscreen for the REC Q BMS to get a good remote visible battery status then.


I need an easy and clear SOC and system status when Im not at the cabin but others are.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

You can use the VRM remote console for that.
https://www.victronenergy.com/live/ccgx:start#remote_console_on_vrm_-_setup

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic