Hi
I have a Multiplus 2000 acting as a UPS for a vital pump in my house, as we live below the water table in the winter. The pump takes ~16A startup current and is rated at 6A continuous.
The Multiplus is connected to a 120Ah NorthStar battery which should give me ~1hr of continuous pumping or over 12hrs in real world as the pump is only on periodically to empty the tank.
I have a Hyundia HY3000Ci Converter Generator. This is a converter generator not pure sine wave inverter.
In case of long term power outage, if I disconnect the main supply and connect the generator to the Multiplus:
Q1: Will the MultiPlus 'clean' up the generators power allowing me to use sensitive equipment (such as the pump control board)
Q2: Do I need to add more hardware or enable the MultiPlus for "Power Asssit" mode to enable the MultiPlus to charge the battery from the generator (when there isn't the pump load) and also to supplement/clean the power when pump load 'on'?
Thank you.
Daniel
.