question

brand avatar image
brand asked

EasySolar 12/1600/70: Inverter won't start after Firmware update

Multiplus Compact showing battery 0 v , Alarm Led alternativly blinking with yellow/Green LEDs. Also charger Not working

BMV 700 showing 13,3 V, battery fully loaded

Reset to factory did not work

What can i do?


EasySolar All-in-One
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Paul B avatar image
Paul B answered ·

try reinstalling the firmware using the VE config program.

check all fuses ( there is a fuse inside the unit and this could be blown for some reason)




1599443844131.png (476.0 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

brand avatar image
brand answered ·

THX, i already reinstalled the Firmware twice successfully, the fuses are ok

Configuration with victron connect and interface mk3 is possible, Victron Connect Shows battery 100%, but 0 Volts, Red LED ist blinking altern. with Green+yellow LED,multiplus won't start, even No function with the inverter-generator

THX for advice


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.