Hi,
I have in issue with the above MPPT no reading the load currents correctly.
During the day with the PV registering a voltage the current on the load output is correct and tracks the consumption correctly.
The problem is at night, the current on the loads, sometimes registers the smaller consumers but once they are above a couple of Amps, the reading will be all over the place, but mostly show 0A.
All loads are connected through the Load Output connections.
This is the 2nd MPPT that displays this issue.
The screengrab is taken at night, there is in the region of 8A being consumed, but not registering.
If I switch the load output to always off, the consumers turn off.
Any thoughts please?