question

Simon Phillips avatar image
Simon Phillips asked

Max Temp compensated charge voltage for Victron deep Cycle AGM Batteries

I have a max charge voltage setting on my charge controller . I have temp compensation set up at -4mv per cell as per the data sheet . Is there a max charge voltage the batteries will take when very cold ? I note the Absorption range is up to 14.6volt or 14.9 volt fast charge , should 14.9v be the highest even at low temperatures of 5 degrees and under ? or does it not matter and I should set at 15.5 v or something ?

MPPT ControllersAGM Batterytemperature compensation
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·

@Simon Phillips

Set the battery voltage to what is recommended by datasheet.

The mppt measures and compensates for the temperate itself. It is described in this thread here.

https://community.victronenergy.com/questions/1643/how-the-internal-temperature-compensation-feature.html

If you would like better temperature monitoring as it moves through the day. Add a Smart Battery Sense or something similar to the system.

https://www.victronenergy.com/accessories/smart-battery-sense


0 Likes 0 ·
0 Answers

Related Resources

Additional resources still need to be added for this topic

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual