question

marsupilami avatar image
marsupilami asked

Blue smart charger. Connection orange cable.

Hi,

my charger has this cable connections. Red and black is clear. But I can't find find any discription for the orange one.

Can someone help me?

Regards

charger
1599025757859.png (122.6 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

You have the "Si" model.
"Si" stands for "start interruption".
This wire gives you a signal (0,5A max) which you can use to prevent your engine from starting as long as the charger is powered.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

marsupilami avatar image
marsupilami answered ·

Danke, Mattias.

Grüße aus NRW

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jrcresawn avatar image
jrcresawn answered ·

@Marsupilami I wondered about the orange wire too. I thought it might have been a remote temperature probe for the battery. Thanks for the reply @Matthias Lange - DE. Is the orange wire documented anywhere?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

@jrcresawn
No not really, it is only mentioned in the spec sheet.

0 Likes 0 ·
ip67-si.png (14.9 KiB)

Related Resources

Additional resources still need to be added for this topic