question

rich21044 avatar image
rich21044 asked

Multiple charge profiles in single smart device?

I was looking at the ip22 3 output charger as a potential solution for my need to charge both a standard lead acid starter battery and a lithium auxiliary battery but have read in other posts that it follows the same charge profile on all outputs. Is there a Victron Smart device that can deal with two battery types in a single unit or should I just get 2 independent chargers?

battery chargingLithium Batterylead-acidip22
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

Two independent chargers would be the solution

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

VictronConnect VE.Bus charging manual  

Additional resources still need to be added for this topic

Battery Compatibility

Did You Know - How to create a battery profile for non-Victron batteries?