IMG_3092.MOVSo my DC Power on my Cerbo GX display seems to fluctuate wildly and when I am inverting the more AC loads I apply the higher this DC usage goes. This is what I see when Inverting.
This is what I see on shore power. And these fluctuate sometimes a 100 plus watts at any given time. My Chassis ground to the main Neg buss bar is about 10 feet from the batteries and I have the inverter cases grounded to that same chassis rail but about 8 feet away closer to the inverters. Even when I have disconnected the chassis ground for the inverter cases I still see this. As a side note I do have the inverter chassis grounded together as they are right next to each other not sure if the makes a difference.
Thanks to anyone who can help.