question

pbet avatar image
pbet asked

What happens if the Lynx Ion Shunt BMS looses it Can-Bus connection with the batteries?

We have a Lynx-Ion BMS shunt 1000A with 20 x 200Ah Victron batteries connected via Can-Bus.

We found out that the Can -Bus termination resistor is not making good contact in its RJ45 socket in the Shunt. What happens if the Shunt looses its contact via Can-bus with the batteries?

Because we experience weird alarms right now. (State error (10), Over Voltage alarm, and a few seconds later Undervoltage alarm?) The SOC is 100%.

BMS
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers