We have a project where the smart solar MPPT 150/100 devices, must be monitored by SNMP, please could You help me if we can apply with Victron products???
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
We have a project where the smart solar MPPT 150/100 devices, must be monitored by SNMP, please could You help me if we can apply with Victron products???
The MPPT devices themselves do not have ethernet network connectivity, s SNMP is not possible directly to those devices.
The GX devices are connected to the network over ethernet. SNMP is not supported here either, but it may be possible to enable it with root access to the underlying operating system (Venus OS). If the MPPT controllers would be connected to a GX device then maybe you could implement SNMP to interrogate the devices on the dbus.
You will be on your own to do this as SNMP is not suppoerted at all.
Thanks so much, it means that we can interrogate the devices with the modbus from Venus GX. I downloaded the file"CCGX-Modbus-TCP-register-list-2.20", but it is corrupt. please could you tell me where we can get the modbus register file ??? if You have the file could you send me it please??
again thanks so much
Jorge Gonzalez Ruiz : jgonzalezr@icetel.cl
Additional resources still need to be added for this topic
24 People are following this question.