This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
So here is my setup
Cerbo GX
Smart Shunt
4 MPPT 100/50 each with (2) 340 watt panels attached to each
All cables on the output side of the controllers are the same length.
Is there a best practice setup to have these controllers work together as one unit?
hi @rjoustra Smartnetworking may be an interesting option. Makes for some good bedtime reading. Also, search the forum as there has been some discussions on the topic.
https://www.victronenergy.com/live/victronconnect:ve-smart-networking
If they have the same settings are the minor differences going to make a whole hill of beans?
I have 4 far bigger MPPT's in parallel so long as they all turn on in the AM, I am unconcerned if one turns off 10 mins early.
